Click here to find out
WHY HANDI-FOAM IS RIGHT FOR YOU!

Handi-Foam® Two-Component Foam is a chemically cured foam system. It is generally used where a product is needed for filling gaps larger that your fist. Two-component foam systems consist of an “A” component and a “B” component. These two components mix in the nozzle of the dispensing unit, and the resulting foam cures much more quickly than one-component foams. Handi-Foam Two-component Foams are available in a variety of densities. Two-component foam systems will expand immediately upon chemical reaction of A-component and B-component to a final volume that is 3 to 5 times the dispensed volume, in typical applications, and may be as much as 8 times the dispensed volume in specific applications, depending on various factors such as cavity size, ambient conditions, etc. The foam will cure to a semi-rigid closed cell foam upon the chemical reaction of component A (polymeric isocyanate) with component B (a polyol blend containing certain additives) and carries an R-Value of 6 to 7 per inch (.02w/m.k). Handi-Foam Two-Component Foam is tack free in less than 60 seconds and cures completely in 2-5 minutes. Cured foam can be trimmed, sanded and/or painted. It is different from Handi-Foam® One-Component Foam since is relies on moisture to cure the bead and is generally used for bead sizes smaller that your thumb. Handi-Foam® One-Component Foam is a UL classified sealant. It can be used to economically insulate, seal, bond, fill and stop air infiltration. One-Component foams cure when moisture in the air reacts with the chemistry of the foam. All one-component foams meet ASTM E-84 flame spread requirements for caulks and sealants. Handi-Foam One-Component Foam is tack-free in less than 10 minutes and cures within 24 hours. Handi-Foam One-Component Foams cure to in-place densities between 1.0 and 1.5 lb. per cubic foot (16 - 24 kg per cubic meter) and carry an R-value of 4 to 5 per inch (.03 w/m.k). Cured foam can be trimmed, sanded and/or painted. These Handi-Foam® One-Component Foam products can not be obtained on this site at this time, but can be by calling 888-TRY-DIAMond during M-F, 7:00 am through 6:00 pm)

Typical applications include:

filling cracks and voids
sealing around HVAC units
filling gaps around pipes
filling gaps behind electrical outlets
sealing cracks at wall and floor joints
fixing small holes and other damage

Quality You Can See
Fomo Products Inc. closed cell formula has very few air pockets. This makes the foam both sturdier and more effective, keeps the insulation from absorbing moisture (which in turn helps inhibit mold growth), and stops air transport. Two part foam kits are formulated with an A chemical and a B chemical. This allows are products to be tack free in as little as 30 seconds, and completely cured in just 3-5 minutes. Once cured, all foams may be sanded or cut as desired.

Fomo's Closed Cell Foam

Their Open Cell Foam

Other Foams Don't Compare
Open cell Formulas, such as those used by many of our competitors appear sponge like, with large air pockets throughout. This makes them softer & more vulnerable to damage, lets them absorb moisture, takes away from their insulating power, and can allow mold growth.

Fomo Products, Inc., USA, was founded in 1975. As a member of the FLM Group of Companies, Fomo Products is part of one of the largest global manufacturer's of one- and two-component polyurethane (PU) foam systems in pressurized, disposable and refillable packaging.

Based in the USA, Fomo Products is committed to providing high-quality polyurethane foam systems and associated products to the global market. This dedication to quality is reflected in the fact that Fomo Products has been an ISO 9001 registered company since 1995, and has continued significant investments in the research and development of innovative products.

In addition to this commitment to manufacturing only the highest quality products, Fomo Products continues to maintain the highest levels of customer service and technical support. From the dedicated customer support staff and technical service desk to the highly trained field sales representatives, the goal is simple – exceed the customer’s expectations.

Paralleling this commitment to quality, Fomo Products is a leader in innovations to minimize the impact o the environment. All the foam systems manufactured by Fomo Products are designed within the international guidelines for protection of the ozone layer, and with respect to the Montreal Protocol, 1987 and other environmental guidelines, utilizing various blowing agents to assist in the safety of the end user. Our North American manufacturing facility also meets or exceeds all U.S. environmental regulations. Most importantly, Fomo Products has a proud history of commercial introductions of environmentally sensitive products and manufacturing practices years ahead of regulatory requirements.

Fomo Products’ product range includes one-component sealants, two-component spray foam in both refillable and disposable systems, two-component pour-in-place insulation systems, a line of polyurethane-based adhesives, and specialty products recognized for outstanding performance where fire, smoke and toxicity issues are critical concerns.

Brand name products such as Handi-Foam®, Fast Foam®, Handi-Seal®, Handi-Stick®, and Silent Seal® are developed with dispensing and packaging innovations covered under numerous domestic and international patents. Customers of Fomo Products have come to expect and appreciate this standard of excellence, a standard that everyone in the organization continually strives to surpass.

Fomo Products maintains significant in-house research and development capabilities, enabling the company to meet and exceed the varied needs of a global marketplace. This dedication to innovative products, systems and technical service keeps Fomo Products in place as a worldwide leader in polyurethane foam technology.

Globally placed manufacturing plants, sales offices and far-reaching domestic and global warehouse locations enable Fomo Products to consistently exceed customer delivery requirements.

Fomo Products has a broad line of innovative products developed to meet and exceed the requirements of today’s global market. Whether your needs are for insulation, sealants, adhesives or fire-rated products, Fomo Products has a solution for you. Contact Fomo Products today and give us the opportunity to deliver what we promise – product, technology, service and support that meets or exceed your expectations.